GOLDCUT JK Series Driver For Windows XP 64bit Free
GOLDCUT JK Series Driver for Windows XP 64bit Free
If you have a GOLDCUT JK Series vinyl cutter and you want to use it with Windows XP 64bit, you might have trouble finding the right driver for it. The official website of GOLDCUT does not provide any driver download link, and the CD that comes with the cutter might not work with your operating system. However, there is a way to download and install the GOLDCUT JK Series driver for Windows XP 64bit for free, and this article will show you how.
Step 1: Download the driver from USCutter
The first step is to download the driver from USCutter, a website that sells vinyl cutters and accessories. USCutter provides a driver download link for the GOLDCUT JK Series cutter on their support page. You can click on this link to download a ZIP file that contains the driver files. The file name is GoldCutDriver.zip and the file size is about 3 MB.
Step 2: Extract the driver files
The second step is to extract the driver files from the ZIP file. You can use any software that can unzip files, such as WinRAR or 7-Zip. After you extract the files, you will see a folder named GoldCutDriver that contains two subfolders: 32bit and 64bit. Since you are using Windows XP 64bit, you need to open the 64bit folder and copy all the files inside it to a location of your choice. You can also rename the folder to something more descriptive, such as GOLDCUT JK Series Driver.
Step 3: Install the driver manually
The third step is to install the driver manually using the Device Manager. To do this, you need to connect your GOLDCUT JK Series cutter to your computer using a USB cable and turn it on. Then, you need to open the Device Manager by clicking on the Start button, right-clicking on My Computer, and selecting Properties. On the System Properties window, click on the Hardware tab and then click on the Device Manager button. You will see a list of devices connected to your computer. Look for a device named Unknown Device or GOLDCUT JK Series under the Other Devices category. Right-click on it and select Update Driver.
On the Hardware Update Wizard window, select No, not this time and click Next. Then, select Install from a list or specific location (Advanced) and click Next. Then, select Don't search. I will choose the driver to install and click Next. Then, click on Have Disk and browse to the location where you copied the driver files in Step 2. Select the file named GOLDCUTJK.inf and click Open. Then, click OK and Next. The wizard will install the driver for your GOLDCUT JK Series cutter. Click Finish when done.
Step 4: Test your cutter
The final step is to test your cutter and make sure it works properly. You can use any software that supports vinyl cutting, such as SignCut Pro or FlexiSign. Make sure you select the correct port and model for your cutter in the software settings. You can also adjust the speed and pressure of your cutter according to your needs. Then, send a test cut to your cutter and check if it cuts correctly.
If everything works fine, congratulations! You have successfully installed the GOLDCUT JK Series driver for Windows XP 64bit for free. If you encounter any problems or errors, you can try to troubleshoot them by following some tips from other users who have faced similar issues . You can also contact USCutter or GOLDCUT for technical support if needed.